Water Based Concrete Surface and Evaporation Retarders

MBT X-Poz-R by BASF- Stock Item in Pink
MBT X-POZ-R is a water-based top surface and/or form retarder used to produce uniform exposed-aggregate finishes on architectural or ornamental concrete.
MORE INFO  

Surface Retarders Formula F and S by Euclid Chemical - Stock Item
CONCRETE SURFACE RETARDERS F & S are chemical formulations which retard, but do not "kill" the set of the mortar at the surface of concrete. When the underlying concrete has hardened, the retarded mortar surface can be flushed off with a stream of water and/or removed by scrubbing with a stiff brush. Since these compounds do not "kill" the set, if they are left on the concrete or unintentionally splashed on other fresh concrete, they will permit the concrete to eventually attain a set and achieve full strength. These CONCRETE SURFACE RETARDERS are available in two formulations to meet varying job requirements: Formula F is a paint-like emulsion designed for application directly to forms. Formula S is a neutral, sprayable liquid for application to freshly placed horizontal concrete surfaces.
MORE INFO   MSDS FORMULA F    MSDS FORMULA S

Eucobar by Euclid Chemical  - Stock Item
EUCOBAR is designed to be used as an evaporation retardant on concrete flatwork of all types. When sprayed over fresh concrete, EUCOBAR forms a thin, continuous film which prevents rapid moisture loss from the concrete surface. It is easy to use requiring only the addition of water before spray application. EUCOBAR is especially effective when concreting operations must be performed in direct sun, wind, high temperatures, or low relative humidity.
MORE INFO   MSDS