Vertical Repair

HB2 Repair Mortar by BASF - Stock Item
HB2 Repair Mortar is a two-component polymer-modified high-build, lightweight repair mortar with an integral corrosion inhibitor. It is designed for repairing vertical and overhead concrete surfaces in deep lifts--up to 3" on vertical and 1- 1/2" on overhead surfaces. It can be applied by hand, trowel, or low-velocity wet spraying.
MORE INFO   MSDS     LEED

HBA Repair Mortar by BASF - Stock Item
HBA Repair Mortar is a two-component polymer-modified rapid-setting mortar. It is used to repair vertical and overhead concrete surfaces in deep lifts-- up to 3" on vertical and 1-1/2" on overhead surfaces.
MORE INFO   MSDS     LEED

Emaco GP (Thoropatch) by BASF - Stock Item
Emaco GP is a fast-setting, non-sag cement-based repair mortar for small repairs on vertical, horizontal, and overhead surfaces.
MORE INFO   MSDS    LEED

LA 40 by BASF - Stock Item
LA40 Repair Mortar is a one-component shrinkage-compensated micro concrete. It is designed for large volume repairs, including structural elements, typically in applications from 2" (51 mm) to full depth. (Vertical form and pour)
MORE INFO   MSDS    LEED

Emaco Plug by BASF - Stock Item
Emaco® Plug is a cement-based water-stop mortar. It will stop running and seeping water through cracks in concrete under hydrostatic pressure. It can also be used to provide a watertight seal in pipes, tanks, manholes, and a variety of other locations.
MORE INFO   MSDS     LEED

Speed Plug (Dam-It) by Euclid Chemical - Stock Item
 Speed Plug is a fast setting, hydraulic cement product formulated to stop leaks in concrete and masonry surfaces. It is particularly effective for stopping the flow of running water.
MORE INFO   MSDS

Emaco R350 CI by BASF - Stock Item
Emaco® R350 CI is a one-component low-density, polymer-modified renovation mortar that contains an integral corrosion inhibitor. It is ideally suited for patching and resurfacing distressed concrete. Its lightweight nature allows for excellent build without sagging. Emaco® R350 CI repair mortar can be used both interior and exterior.
MORE INFO   MSDS     LEED

Emaco S88 CI by BASF - Stock Item
Emaco® S88 CI repair mortar is a one-component rheoplastic, shrinkage-compensated, fiber-reinforced product that contains an integral corrosion inhibitor. It contains silica fume to offer high strength and superior performance for structural concrete repairs. Emaco® S88 CI can be applied vertically or overhead by low-pressure spraying or hand troweling.
MORE INFO   MSDS     LEED

Eucoseal by Euclid Chemical - Stock Item
EUCOSEAL is a heavy duty cementitious coating intended to waterproof and protect masonry. It is mixed with latex or water and applied to the surface of masonry or concrete walls.
MORE INFO   MSDS

Eucopatch by Euclid Chemical - Stock Item
EUCOPATCH is a one part, fast setting, patching and repair material for use on new and existing concrete and masonry surfaces.  This product is designed for patching or reconstruction of damaged concrete or masonry interior or exterior.  Typical applications would be for honeycombed walls, columns and foundations; cracked or broken stucco or masonry; precast concrete members, cubs, gutters and pavements may be repaired with Eucopatch.
MORE INFO   MSDS